in

Remote Desktop Connection Failing After Windows 11 26H2 Update? Here Is the Fix

Are you suddenly unable to connect via Remote Desktop after updating to Windows 11 version 26H2 (or installing recent cumulative updates)? You’re not alone. Many users and IT admins have reported Remote Desktop Protocol (RDP) connection failures following the 26H2 rollout and related September–November 2026 updates.

The most common symptom is error code 0xC000000D with the message “The token that was passed to the function is invalid.” Other users see generic “This computer can’t connect to the remote computer” messages or connections that hang indefinitely.

This guide covers the official Microsoft-confirmed issue, the permanent fix, temporary workarounds, and general troubleshooting steps that resolve most Remote Desktop problems after the 26H2 update.

Why Remote Desktop Fails After Windows 11 26H2

Microsoft has confirmed a known issue that affects non-administrator users trying to connect to remote Windows 11 hosts that have Administrator protection enabled.

  • Error code: 0xC000000D
  • Message: “The token that was passed to the function is invalid.”
  • Affected versions: Windows 11 24H2, 25H2, 26H1, and 26H2
  • Trigger: Installing the September 2026 non-security preview update KB5124010 or later updates

Administrator protection is a security feature (enabled by default in many enterprise security baselines) that forces elevated actions to require re-authentication. A change in how tokens are handled after certain updates broke Remote Desktop access for standard users connecting to protected hosts.

There was also a separate certificate-mismatch related RDP failure introduced by some October preview updates, which the November 2026 security update (KB5132061) resolved.

Quick Check: Is This the Issue Affecting You?

Answer yes to these questions:

  1. You are connecting with a non-administrator account.
  2. The remote computer (host) has Administrator protection enabled.
  3. The host is running Windows 11 24H2 / 25H2 / 26H2 and received updates from late September 2026 onward.
  4. You see error 0xC000000D.

If this matches, the permanent fix is installing the October 28, 2026 (or later) update on the remote host.

Permanent Fix: Install the Official Update on the Host

Microsoft resolved the 0xC000000D issue in the October 28, 2026 preview update KB5127936 and all subsequent updates (including the November 2026 security update KB5132061).

  1. On the remote computer (the one you are trying to connect to), open Settings → Windows Update.
  2. Click Check for updates.
  3. Install any available updates, especially KB5127936 or later cumulative updates.
  4. Restart the remote computer when prompted.
  5. Try the Remote Desktop connection again from the client.

Once the host is updated to a build that includes the fix, non-admin users should be able to connect normally even with Administrator protection enabled.

Note: The client computer (the one you are connecting from) usually does not need a special update for this particular error.

Temporary Workaround: Disable Administrator Protection (Until the Host Is Updated)

If you cannot immediately update the remote host, Microsoft provides a temporary mitigation: turn off Administrator protection on the host.

Using Group Policy (Local or Domain)

  1. On the remote host, press Windows key + R, type gpedit.msc, and press Enter.
  2. Navigate to:
    Computer Configuration → Windows Settings → Security Settings → Local Policies → Security Options
  3. Find the policy: User Account Control: Configure type of Admin Approval Mode
  4. Double-click it and set it to Legacy Admin Approval Mode (or the option that disables the newer Administrator protection behavior).
  5. Click Apply → OK.
  6. Restart the remote computer.

After the restart, try connecting again. Re-enable the stronger protection setting once the permanent update is installed.

Using Microsoft Intune (for managed devices)

IT administrators can deploy a configuration profile that resets the same “User Account Control Type Of Admin Approval Mode” policy to the legacy setting.

Additional Troubleshooting Steps for General RDP Failures

If the error is not 0xC000000D, or if the official fix does not resolve the problem, try these common solutions:

1. Verify Remote Desktop Is Enabled on the Host

  1. On the remote PC: Settings → System → Remote Desktop.
  2. Make sure Remote Desktop is turned On.
  3. Confirm the correct user accounts are allowed to connect.

2. Check Firewall and Network

  • Ensure TCP port 3389 is open on the host firewall (or the custom RDP port if you changed it).
  • Temporarily disable third-party firewalls or VPNs on both sides to test.
  • Confirm both computers can reach each other on the network (ping or other connectivity tests).

3. Restart Key Services

On the remote host, open services.msc and restart these services:

  • Remote Desktop Services
  • Remote Desktop Configuration
  • Remote Desktop Services UserMode Port Redirector

4. Clear Cached Credentials on the Client

  1. Open Credential Manager (search for it in the Start menu).
  2. Go to Windows Credentials.
  3. Remove any saved Remote Desktop credentials for the target computer.
  4. Try connecting again and enter the credentials fresh.

5. Use the Full Computer Name or IP Address

Instead of a short name, try the fully qualified domain name (FQDN) or the IP address of the remote computer.

6. Disable UDP on the Client (Useful for Some Network Issues)

Some RDP problems after updates are resolved by forcing the client to use only TCP:

  1. Press Windows key + R, type regedit, and press Enter.
  2. Navigate to:
    HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\Client
  3. Create a new DWORD (32-bit) value named fClientDisableUDP and set it to 1.
  4. Restart the client computer.

How to Confirm the Fix Worked

After applying the update or workaround:

  1. Attempt the Remote Desktop connection with the same non-admin account that previously failed.
  2. If it connects successfully, the issue is resolved.
  3. On the host, you can verify the installed updates under Settings → Windows Update → Update history.

Frequently Asked Questions

Does this issue affect Windows Server?

The specific 0xC000000D Administrator protection issue is primarily reported on Windows 11 clients acting as Remote Desktop hosts. Separate Remote Desktop Services instability issues that appeared after September 2026 security updates affected some Windows Server versions and were fixed by out-of-band updates.

Will disabling Administrator protection make my system less secure?

Yes, temporarily. It is only a short-term workaround. Re-enable the stronger protection setting as soon as the host receives the permanent fix (KB5127936 or later).

I am an admin user and still cannot connect. What should I do?

The confirmed bug mainly affects non-admin accounts. If you are connecting as an administrator and still fail, focus on the general troubleshooting steps (firewall, services, network, credentials) and ensure both devices are fully updated.

Is there a client-side fix I can apply?

For the 0xC000000D error, the fix must be applied on the remote host. Client-side steps such as clearing credentials or disabling UDP can help with other types of RDP failures.

Final Recommendations

Start by confirming whether the remote host has received KB5127936 or a later cumulative update (including November’s KB5132061). In most cases, installing the latest updates on the host permanently resolves the connection failure.

If you manage multiple machines, prioritize updating the Remote Desktop hosts first. Use the Group Policy or Intune workaround only as a temporary bridge.

Remote Desktop remains a critical tool for remote work and support. Keeping your systems current with the latest cumulative updates is the best way to avoid these types of regressions.

Did one of these methods restore your Remote Desktop connection? Let us know in the comments which step worked for you — it helps others facing the same problem after the Windows 11 26H2 update.

Written by Editor

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Loading…

0

How to Fix Windows 11 KB5132061 Install Error 0x800F0993 (Step-by-Step)

iOS 27.2.1 Battery Drain Fix: 7 Settings to Change Immediately After Updating